Symantec Endpoint Protection
Collect logs from Symantec Endpoint Protection with Elastic Agent.
Version |
2.14.0 (View all) |
Compatible Kibana version(s) |
7.16.0 or higher 8.0.0 or higher |
Subscription level |
Basic |
This integration is for Symantec Endpoint Protection (SEP) logs. It can be used to receive logs sent by SEP over syslog or read logs exported to a text file.
The log message is expected to be in CSV format. Syslog RFC3164 and RCF5424
headers are allowed and will be parsed if present. The data is mapped to
ECS fields where applicable and the remaining fields are written under
symantec_endpoint.log.*
.
If a specific SEP log type is detected then event.provider
is set (e.g.
Agent Traffic Log
).
Syslog setup steps
- Enable this integration with the UDP input.
- If the Symantec management server and Elastic Agent are running on different hosts then configure the integration to listen on 0.0.0.0 so that it will accept UDP packets on all interfaces. This makes the listening port reachable by the Symantec server.
- Configure the Symantec management server to send syslog to the Elastic Agent that is running this integration. See Exporting data to a Syslog server in the SEP guide. Use the IP address or hostname of the Elastic Agent as the syslog server address. And use the listen port as the destination port (default is 9008).
Log file setup steps
- Configure the Symantec management server to export log data to a text file. See Exporting log data to a text file.
- Enable this integration with the log file input. Configure the input to
read from the location where the log files are being written. The default is
C:\Program Files (x86)\Symantec\Symantec Endpoint Protection Manager\data\dump\*.log
.
Logs exported to text file always begin with the event time and severity
columns (e.g. 2020-01-16 08:00:31,Critical,...
).
Log samples
Below are samples of some different SEP log types. These examples have had their
syslog header removed, but when sent over syslog these lines typically
begin with an RFC3164 header like
<51>Oct 3 10:38:14 symantec.endpointprotection.test SymantecServer:
Administrative Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
Site: SEPSite,Server: SEPServer,Domain: _domainOrigin,Admin: _originUser,Administrator log on succeeded
Agent Activity Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
Site: SEPSite,Server Name: exampleserver,Domain Name: Default,The management server received the client log successfully,TESTHOST01,sampleuser01,sample.example.com
Agent Behavior Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
exampleserver,216.160.83.57,Blocked,[AC7-2.1] Block scripts - Caller MD5=d73b04b0e696b0945283defa3eee4538,File Write,Begin: 2019-09-06 15:18:56,End: 2019-09-06 15:18:56,Rule: Rule Name,9552,C:/ProgramData/bomgar-scc-0x5d4162a4/bomgar-scc.exe,0,No Module Name,C:/ProgramData/bomgar-scc-0x5d4162a4/start-cb-hook.bat,User: _originUser,Domain: _domainOrigin,Action Type: ,File size (bytes): 1403,Device ID: SCSI\Disk&Ven_WDC&Prod_WD10SPCX-75KHST0\4&1d8ead7a&0&000200
Agent Packet Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
exampleserver,Local Host: 81.2.69.143,Local Port: 138,Remote Host IP: 81.2.69.144.,Remote Host Name: ,Remote Port: 138,Outbound,Application: C:/windows/system32/NTOSKRNL.EXE,Action: Blocked
Agent Proactive Detection Log
See vendor documentation:External Logging settings and log event severity levels for Endpoint Protection Manager
Potential risk found,Computer name: exampleComputer,Detection type: Heuristic,First Seen: Symantec has known about this file approximately 2 days.,Application name: Propsim,Application type: 127,"Application version: ""3",0,6,"0""",Hash type: SHA-256,Application hash: SHA#1234567890,Company name: Dummy Technologies,File size (bytes): 343040,Sensitivity: 2,Detection score: 3,COH Engine Version: 8.1.1.1,Detection Submissions No,Permitted application reason: MDS,Disposition: Bad,Download site: ,Web domain: ,Downloaded by: c:/programdata/oracle/java/javapath_target_2151967445/Host126,Prevalence: Unknown,Confidence: There is not enough information about this file to recommend it.,URL Tracking Status: Off,Risk Level: High,Detection Source: N/A,Source: Heuristic Scan,Risk name: ,Occurrences: 1,f:\user\workspace\baseline package creator\release\Host214,'',Actual action: Left alone,Requested action: Left alone,Secondary action: Left alone,Event time: 2018-02-16 08:01:33,Inserted: 2018-02-16 08:02:52,End: 2018-02-16 08:01:33,Domain: Default,Group: My Company\SEPM Group Name,Server: SEPMServer,User: exampleUser,Source computer: ,Source IP:
Agent Risk Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
Security risk found,IP Address: 1.128.3.4,Computer name: exampleComputer,Source: Auto-Protect scan,Risk name: WS.Reputation.1,Occurrences: 1,e:\removablemediaaccessutility.exe,,Actual action: All actions failed,Requested action: Process terminate pending restart,Secondary action: Left alone,Event time: 2019-09-03 08:12:25,Inserted: 2019-09-03 08:14:03,End: 2019-09-03 08:12:25,Last update time: 2019-09-03 08:14:03,Domain: SEPMServerDoman,Group: My Company\GroupName,Server: SEPMServerName,User: exampleUser,Source computer: ,Source IP: ,Disposition: Bad,Download site: ,Web domain: ,Downloaded by: e:/removablemediaaccessutility.exe,Prevalence: This file has been seen by fewer than 5 Symantec users.,Confidence: There is some evidence that this file is untrustworthy.,URL Tracking Status: On,First Seen: Symantec has known about this file approximately 2 days.,Sensitivity: ,Permitted application reason: Not on the permitted application list,Application hash: SHA#1234567890,Hash type: SHA2,Company name: Company Name,Application name: Client for Symantec Endpoint Encryption,Application version: 11.1.2 (Build 1248),Application type: 127,File size (bytes): 4193981,Category set: Malware,Category type: Insight Network Threat,Location: GD-OTS Unmanaged Client - Online,Intensive Protection Level: 0,Certificate issuer: Symantec Corporation,Certificate signer: VeriSign Class 3 Code Signing 2010 CA,Certificate thumbprint: AB6EF1497C6E1C8CCC12F06E945A4954FB41AD45,Signing timestamp: 1482491555,Certificate serial number: AB2D17E62E571F288ACB5666FD3C5230
Agent Scan Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
Scan ID: 123456789,Begin: 2020-01-31 11:35:28,End: 2020-01-31 11:45:28,Started,Duration (seconds): 600,User1: exampleUser,User2: SYSTEM,Scan started on selected drives and folders and all extensions.,Scan Complete: Risks: 0 Scanned: 916 Files/Folders/Drives Omitted: 0 Trusted Files Skipped: 0,Command: Not a command scan (),Threats: 0,Infected: 0,Total files: 916,Omitted: 0,Computer: _destinationHostname,IP Address: 1.128.3.4,Domain: exampleDomain,Group: Company\US\UserWS\Main Office,Server: SEPServer
Agent Security Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
server03,Event Description: ARP Cache Poison,Local Host IP: 0.0.0.0,Local Host MAC: 2DFF88AABBDC,Remote Host Name: ,Remote Host IP: 0.0.0.0,Remote Host MAC: AABBCCDDEEFF,Inbound,Unknown,Intrusion ID: 0,Begin: 2020-11-23 13:56:35,End Time: 2020-11-23 13:56:35,Occurrences: 1,Application: ,Location: Remote,User Name: bobby,Domain Name: local,Local Port: 0,Remote Port: 0,CIDS Signature ID: 99990,CIDS Signature string: ARP Cache Poison,CIDS Signature SubID: 0,Intrusion URL: ,Intrusion Payload URL: ,SHA-256: ,MD-5:
Agent System Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
exampleHostname,Category: 0,CVE,New content update failed to download from the management server. Remote file path: https://server:443/content/{02335EF8-ADE1-4DD8-9F0F-2A9662352E65}/190815061/xdelta190815061_To_190816061.dax,Event time: 2019-08-19 07:14:38
Agent Traffic Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
host-plaintext,Local Host IP: 216.160.83.61,Local Port: 80,Local Host MAC: CCF9E4A91226,Remote Host IP: 216.160.83.61,Remote Host Name: ,Remote Port: 33424,Remote Host MAC: 2C3AFDA79E71,TCP,Inbound,Begin: 2020-11-11 19:25:21,End Time: 2020-11-11 19:25:28,Occurrences: 4,Application: C:/WINDOWS/system32/NTOSKRNL.EXE,Rule: Block Unapproved Incoming Ports,Location: Default,User Name: sampleuser4,Domain Name: SMPL,Action: Blocked,SHA-256: 5379732000000000000000000000000000000000000000000000000000000000,MD-5: 53797320000000000000000000000000
Policy Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
Site: SEPSite,Server: exampleHostname,Domain: exampleDomain,Admin: exampleAdmin,Event Description: Policy has been edited: Edited shared Intrusion Prevention policy: SEPPolicyName,SEPPolicyName
System Log
See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager
Site: SEPSite,Server: exampleHostname,Symantec Endpoint Protection Manager could not update Intrusion Prevention Signatures 14.0.
Exported fields
Field | Description | Type |
---|---|---|
@timestamp | Event timestamp. | date |
cloud.account.id | The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier. | keyword |
cloud.availability_zone | Availability zone in which this host is running. | keyword |
cloud.image.id | Image ID for the cloud instance. | keyword |
cloud.instance.id | Instance ID of the host machine. | keyword |
cloud.instance.name | Instance name of the host machine. | keyword |
cloud.machine.type | Machine type of the host machine. | keyword |
cloud.project.id | Name of the project in Google Cloud. | keyword |
cloud.provider | Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean. | keyword |
cloud.region | Region in which this host is running. | keyword |
container.id | Unique container id. | keyword |
container.image.name | Name of the image the container was built on. | keyword |
container.labels | Image labels. | object |
container.name | Container name. | keyword |
data_stream.dataset | Data stream dataset. | constant_keyword |
data_stream.namespace | Data stream namespace. | constant_keyword |
data_stream.type | Data stream type. | constant_keyword |
destination.address | Some event destination addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain , depending on which one it is. | keyword |
destination.as.number | Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet. | long |
destination.as.organization.name | Organization name. | keyword |
destination.as.organization.name.text | Multi-field of destination.as.organization.name . | match_only_text |
destination.domain | The domain name of the destination system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment. | keyword |
destination.geo.city_name | City name. | keyword |
destination.geo.continent_name | Name of the continent. | keyword |
destination.geo.country_iso_code | Country ISO code. | keyword |
destination.geo.country_name | Country name. | keyword |
destination.geo.location | Longitude and latitude. | geo_point |
destination.geo.name | User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation. | keyword |
destination.geo.region_iso_code | Region ISO code. | keyword |
destination.geo.region_name | Region name. | keyword |
destination.ip | IP address of the destination (IPv4 or IPv6). | ip |
destination.mac | MAC address of the destination. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen. | keyword |
destination.packets | Packets sent from the destination to the source. | long |
destination.port | Port of the destination. | long |
ecs.version | ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events. | keyword |
error.message | Error message. | match_only_text |
event.category | This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type , which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories. | keyword |
event.dataset | Name of the dataset. | constant_keyword |
event.ingested | Timestamp when an event arrived in the central data store. This is different from @timestamp , which is when the event originally occurred. It's also different from event.created , which is meant to capture the first time an agent saw the event. In normal conditions, assuming no tampering, the timestamps should chronologically look like this: @timestamp < event.created < event.ingested . | date |
event.kind | This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not. | keyword |
event.module | Name of the module this data is coming from. | constant_keyword |
event.start | event.start contains the date when the event started or when the activity was first observed. | date |
event.type | This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types. | keyword |
file.hash.sha1 | SHA1 hash. | keyword |
file.name | Name of the file including the extension, without the directory. | keyword |
file.path | Full path to the file, including the file name. It should include the drive letter, when appropriate. | keyword |
file.path.text | Multi-field of file.path . | match_only_text |
file.pe.company | Internal company name of the file, provided at compile-time. | keyword |
file.pe.file_version | Internal version of the file, provided at compile-time. | keyword |
file.pe.product | Internal product name of the file, provided at compile-time. | keyword |
file.size | File size in bytes. Only relevant when file.type is "file". | long |
file.x509.issuer.common_name | List of common name (CN) of issuing certificate authority. | keyword |
file.x509.not_before | Time at which the certificate is first considered valid. | date |
file.x509.serial_number | Unique serial number issued by the certificate authority. For consistency, if this value is alphanumeric, it should be formatted without colons and uppercase characters. | keyword |
host.architecture | Operating system architecture. | keyword |
host.containerized | If the host is a container. | boolean |
host.domain | Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host's LDAP provider. | keyword |
host.hostname | Hostname of the host. It normally contains what the hostname command returns on the host machine. | keyword |
host.id | Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of beat.name . | keyword |
host.ip | Host ip addresses. | ip |
host.mac | Host mac addresses. | keyword |
host.name | Name of the host. It can contain what hostname returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use. | keyword |
host.os.build | OS build information. | keyword |
host.os.codename | OS codename, if any. | keyword |
host.os.family | OS family (such as redhat, debian, freebsd, windows). | keyword |
host.os.kernel | Operating system kernel version as a raw string. | keyword |
host.os.name | Operating system name, without the version. | keyword |
host.os.name.text | Multi-field of host.os.name . | text |
host.os.platform | Operating system platform (such centos, ubuntu, windows). | keyword |
host.os.version | Operating system version as a raw string. | keyword |
host.type | Type of host. For Cloud providers this can be the machine type like t2.medium . If vm, this could be the container, for example, or other information meaningful in your environment. | keyword |
input.type | Input type. | keyword |
log.file.path | Full path to the log file this event came from, including the file name. It should include the drive letter, when appropriate. If the event wasn't read from a log file, do not populate this field. | keyword |
log.level | Original log level of the log event. If the source of the event provides a log level or textual severity, this is the one that goes in log.level . If your source doesn't specify one, you may put your event transport's severity here (e.g. Syslog severity). Some examples are warn , err , i , informational . | keyword |
log.offset | Offset of the entry in the log file. | long |
log.source.address | Source address from which the log event was read / sent from. | keyword |
log.syslog.appname | The device or application that originated the Syslog message, if available. | keyword |
log.syslog.hostname | The hostname, FQDN, or IP of the machine that originally sent the Syslog message. This is sourced from the hostname field of the syslog header. Depending on the environment, this value may be different from the host that handled the event, especially if the host handling the events is acting as a collector. | keyword |
log.syslog.priority | Syslog numeric priority of the event, if available. According to RFCs 5424 and 3164, the priority is 8 * facility + severity. This number is therefore expected to contain a value between 0 and 191. | long |
log.syslog.process.name | Deprecated. Use the ECS log.syslog.appname field. | alias |
log.syslog.process.pid | Deprecated. Use the ECS log.syslog.procid field. | long |
log.syslog.procid | The process name or ID that originated the Syslog message, if available. | keyword |
log.syslog.structured_data | Structured data expressed in RFC 5424 messages, if available. These are key-value pairs formed from the structured data portion of the syslog message, as defined in RFC 5424 Section 6.3. | flattened |
log.syslog.version | The version of the Syslog protocol specification. Only applicable for RFC 5424 messages. | keyword |
message | For log events the message field contains the log message, optimized for viewing in a log viewer. For structured logs without an original message field, other fields can be concatenated to form a human-readable summary of the event. If multiple messages exist, they can be combined into one message. | match_only_text |
network.community_id | A hash of source and destination IPs and ports, as well as the protocol used in a communication. This is a tool-agnostic standard to identify flows. Learn more at https://github.com/corelight/community-id-spec. | keyword |
network.direction | Direction of the network traffic. When mapping events from a host-based monitoring context, populate this field from the host's point of view, using the values "ingress" or "egress". When mapping events from a network or perimeter-based monitoring context, populate this field from the point of view of the network perimeter, using the values "inbound", "outbound", "internal" or "external". Note that "internal" is not crossing perimeter boundaries, and is meant to describe communication between two hosts within the perimeter. Note also that "external" is meant to describe traffic between two hosts that are external to the perimeter. This could for example be useful for ISPs or VPN service providers. | keyword |
network.transport | Same as network.iana_number, but instead using the Keyword name of the transport layer (udp, tcp, ipv6-icmp, etc.) The field value must be normalized to lowercase for querying. | keyword |
network.type | In the OSI Model this would be the Network Layer. ipv4, ipv6, ipsec, pim, etc The field value must be normalized to lowercase for querying. | keyword |
observer.product | The product name of the observer. | constant_keyword |
observer.type | The type of the observer the data is coming from. | constant_keyword |
observer.vendor | Vendor name of the observer. | constant_keyword |
process.executable | Absolute path to the process executable. | keyword |
process.executable.text | Multi-field of process.executable . | match_only_text |
process.hash.md5 | MD5 hash. | keyword |
process.hash.sha256 | SHA256 hash. | keyword |
process.name | Process name. Sometimes called program name or similar. | keyword |
process.name.text | Multi-field of process.name . | match_only_text |
process.pid | Process id. | long |
related.hash | All the hashes seen on your event. Populating this field, then using it to search for hashes can help in situations where you're unsure what the hash algorithm is (and therefore which key name to search). | keyword |
related.ip | All of the IPs seen on your event. | ip |
related.user | All the user names or other user identifiers seen on the event. | keyword |
rule.id | A rule ID that is unique within the scope of an agent, observer, or other entity using the rule for detection of this event. | keyword |
rule.name | The name of the rule or signature generating the event. | keyword |
source.address | Some event source addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain , depending on which one it is. | keyword |
source.as.number | Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet. | long |
source.as.organization.name | Organization name. | keyword |
source.as.organization.name.text | Multi-field of source.as.organization.name . | match_only_text |
source.domain | The domain name of the source system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment. | keyword |
source.geo.city_name | City name. | keyword |
source.geo.continent_name | Name of the continent. | keyword |
source.geo.country_iso_code | Country ISO code. | keyword |
source.geo.country_name | Country name. | keyword |
source.geo.location | Longitude and latitude. | geo_point |
source.geo.name | User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation. | keyword |
source.geo.region_iso_code | Region ISO code. | keyword |
source.geo.region_name | Region name. | keyword |
source.ip | IP address of the source (IPv4 or IPv6). | ip |
source.mac | MAC address of the source. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen. | keyword |
source.port | Port of the source. | long |
symantec_endpoint.log.action | The action taken on the traffic, e.g. "Blocked". | keyword |
symantec_endpoint.log.actual_action | Actual action from risk logs and proactive detection (SONAR) logs. | keyword |
symantec_endpoint.log.admin | Name of the SEPM admin. | keyword |
symantec_endpoint.log.api_name | API name that was blocked (agent behavior log). | keyword |
symantec_endpoint.log.application | The full path name of the application involved. | keyword |
symantec_endpoint.log.application_hash | The hash for this application. | keyword |
symantec_endpoint.log.application_name | The application name. | keyword |
symantec_endpoint.log.application_type | Application type (Trojan, key logger etc). | keyword |
symantec_endpoint.log.application_version | The application version. | keyword |
symantec_endpoint.log.begin | Start time of the event (also see event.start). | keyword |
symantec_endpoint.log.caller_process_id | The ID of the process that triggers the logging. | keyword |
symantec_endpoint.log.caller_process_name | The full path name of the application involved. It may be empty if the application is unknown, or if OS itself is involved, or if no application is involved. Also, it may be empty if profile says, "don't log application name in raw traffic log". | keyword |
symantec_endpoint.log.caller_return_address | The return address of the caller. This field allows the detection of the calling module that makes the API call. This is historically not used. You can expect Return Address to always be 0. | keyword |
symantec_endpoint.log.caller_return_module_name | The module name of the caller. See CallerReturnAddress for more information. Return Module name is historically unused. You can expect Return Module name to always be "No Module Name" except where you see Sysplant when sysplant has started. | keyword |
symantec_endpoint.log.category | Agent system log category (generally not populated by SEPM). | keyword |
symantec_endpoint.log.category_set | Agent risk log category. | keyword |
symantec_endpoint.log.category_type | Agent risk log category type. | keyword |
symantec_endpoint.log.certificate_issuer | The certificate's issuer. | keyword |
symantec_endpoint.log.certificate_serial_number | The certificate's serial number. | keyword |
symantec_endpoint.log.certificate_signer | The certificate's signer. | keyword |
symantec_endpoint.log.certificate_thumbprint | The certificate's thumbprint. | keyword |
symantec_endpoint.log.cids_signature_id | The signature ID. | keyword |
symantec_endpoint.log.cids_signature_string | The signature name. | keyword |
symantec_endpoint.log.cids_signature_subid | The signature sub ID. | keyword |
symantec_endpoint.log.coh_engine_version | TruScan engine version. | keyword |
symantec_endpoint.log.command | Command sent from the SEPM. | keyword |
symantec_endpoint.log.company_name | The company name from the application (used in agent risk logs). | keyword |
symantec_endpoint.log.computer_name | Name of the host machine (used in agent risk/scan logs). | keyword |
symantec_endpoint.log.confidence | The Confidence level that produced the conviction. Examples: High, low, bad, trustworthy etc. "Confidence: There is strong evidence that this file is untrustworthy." | keyword |
symantec_endpoint.log.description | Description of the virus file. | keyword |
symantec_endpoint.log.detection_score | Score of detection. | keyword |
symantec_endpoint.log.detection_source | Source of the detection. | keyword |
symantec_endpoint.log.detection_type | Type of detection (e.g. heuristic). | keyword |
symantec_endpoint.log.device_id | The GUID of an external device (floppy disk, DVD, USB device, etc.). | keyword |
symantec_endpoint.log.disposition | Good / Bad / Unknown / Not available. | keyword |
symantec_endpoint.log.domain_name | SEPM domain name. | keyword |
symantec_endpoint.log.download_site | The URL determined from where the image was downloaded. | keyword |
symantec_endpoint.log.downloaded_by | The creator process of the dropper threat. | keyword |
symantec_endpoint.log.duration_seconds | The length of the scan, in seconds. | keyword |
symantec_endpoint.log.end | Start time of the event (also see event.end). | keyword |
symantec_endpoint.log.event_description | Description of the event. Usually, the first line of the description is treated as the summary. | keyword |
symantec_endpoint.log.event_source | The data source. NETPORT, NATSRV, Network Intrusion Protection System, LiveUpdate Manager etc. | keyword |
symantec_endpoint.log.event_time | Time of event occurrence. | date |
symantec_endpoint.log.file_path | The file path of the attacked file. | keyword |
symantec_endpoint.log.file_size_bytes | File size of application. | keyword |
symantec_endpoint.log.first_seen | The first seen date for the convicted application. | keyword |
symantec_endpoint.log.group | SEPM client group name. | keyword |
symantec_endpoint.log.hash_type | Application hash type (MD5, SHA1, SHA256 etc). | keyword |
symantec_endpoint.log.infected | The number of files that the scan found that were infected. | long |
symantec_endpoint.log.inserted | The time that the event was inserted into the database. | date |
symantec_endpoint.log.intensive_protection_level | The High Intensity Detection Level. | keyword |
symantec_endpoint.log.intrusion_id | Intrusion ID. | keyword |
symantec_endpoint.log.intrusion_payload_url | The URL that hosted the payload. | keyword |
symantec_endpoint.log.intrusion_url | The URL from the detection. | keyword |
symantec_endpoint.log.ip_address | IP Address of the machine. | keyword |
symantec_endpoint.log.last_update_time | The time on the server when the event is logged into the system or updated in the system (GMT). | date |
symantec_endpoint.log.local_host | The host name of the client computer. | keyword |
symantec_endpoint.log.local_host_ip | The IP address of the local computer. | keyword |
symantec_endpoint.log.local_host_mac | The MAC address of the local computer. | keyword |
symantec_endpoint.log.local_host_name | The host name of the client computer. | keyword |
symantec_endpoint.log.local_port | The TCP/UDP port of the local computer. | keyword |
symantec_endpoint.log.location | The location used when the event occurred. | keyword |
symantec_endpoint.log.md-5 | The MD5 hash value. | keyword |
symantec_endpoint.log.network_protocol | Localized string for Others/ TCP/ UDP/ ICMP. | keyword |
symantec_endpoint.log.occurrences | The number of attacks. Sometime, when a hacker launches a mass attack, it may be reduced to one event by the log system, depending on the damper period. | keyword |
symantec_endpoint.log.omitted | The number of files that were omitted. | long |
symantec_endpoint.log.parameters | Parameters is the name of the module, process, registry location or file that was used in the API call. Each parameter was converted to string format and separated by one space character. Double quotation mark characters within the string are escaped with a \ character. As an example, in the SEPM ADC policy you may have a rule with a condition which monitors for Load DLL Attempts with the rule being applied to mscoree.dll. In this case, in the parameters field you'd expect to see C:\Windows\SysWOW64\mscoree.dll. | keyword |
symantec_endpoint.log.permitted_application_reason | Reason for allow listing (e.g. Symantec permitted application list, Administrator permitted application list). | keyword |
symantec_endpoint.log.policy_name | Name of the policy. | keyword |
symantec_endpoint.log.prevalence | Number of users that have seen this. | keyword |
symantec_endpoint.log.remote_host_ip | The IP address of the remote computer. | keyword |
symantec_endpoint.log.remote_host_mac | The MAC address of the remote computer. | keyword |
symantec_endpoint.log.remote_port | The TCP/UDP port of the remote computer. | keyword |
symantec_endpoint.log.requested_action | Requested action by policy. | keyword |
symantec_endpoint.log.risk_level | The risk level (high, med, low) for the convicted threat. | keyword |
symantec_endpoint.log.risk_name | keyword | |
symantec_endpoint.log.risk_type | Localized strings for Heuristic / Cookie / Admin Black List / BPE / System Change / N/A. | keyword |
symantec_endpoint.log.rule | The name of the rule that was triggered by the event. If the rule name is not specified in the security rule, then this field is empty. Having the rule name can be useful for troubleshooting. You may recognize a rule by the rule ID, but rule name can help you recognize it more quickly. | keyword |
symantec_endpoint.log.scan_complete | Scan message when scan ended. | keyword |
symantec_endpoint.log.scan_id | The scan ID provided by the agent. | keyword |
symantec_endpoint.log.secondary_action | Secondary action requested by policy | keyword |
symantec_endpoint.log.sensitivity | Engine sensitivity that produced this detection | long |
symantec_endpoint.log.server | Name of the server. | keyword |
symantec_endpoint.log.server_name | Name of the server. | keyword |
symantec_endpoint.log.sha-256 | The SHA-256 hash value. | keyword |
symantec_endpoint.log.signing_timestamp | The certificate's signature timestamp. | date |
symantec_endpoint.log.site | SEPM site name. | keyword |
symantec_endpoint.log.source | Scan source (e.g. scheduled). | keyword |
symantec_endpoint.log.source_computer | Computer name where this event occurred. | keyword |
symantec_endpoint.log.source_ip | IP address of the machine on which the event occurred. | keyword |
symantec_endpoint.log.submission_recommended | Recommendation on whether to submit this detection to Symantec. | boolean |
symantec_endpoint.log.threats | The number of threats that the scan found. | long |
symantec_endpoint.log.total_files | The number of files scanned. | long |
symantec_endpoint.log.traffic_direction | Unknown / Inbound / Outbound | keyword |
symantec_endpoint.log.url_tracking_status | Network intrusion prevention status | keyword |
symantec_endpoint.log.user1 | User when scan started. | keyword |
symantec_endpoint.log.user2 | User when scan ended. | keyword |
symantec_endpoint.log.user_name | keyword | |
symantec_endpoint.log.web_domain | The web domain. | keyword |
tags | List of keywords used to tag each event. | keyword |
url.domain | Domain of the url, such as "www.elastic.co". In some cases a URL may refer to an IP and/or port directly, without a domain name. In this case, the IP address would go to the domain field. If the URL contains a literal IPv6 address enclosed by [ and ] (IETF RFC 2732), the [ and ] characters should also be captured in the domain field. | keyword |
url.original | Unmodified original url as seen in the event source. Note that in network monitoring, the observed URL may be a full URL, whereas in access logs, the URL is often just represented as a path. This field is meant to represent the URL as it was observed, complete or not. | wildcard |
url.original.text | Multi-field of url.original . | match_only_text |
url.path | Path of the request, such as "/search". | wildcard |
url.scheme | Scheme of the request, such as "https". Note: The : is not part of the scheme. | keyword |
user.domain | Name of the directory the user is a member of. For example, an LDAP or Active Directory domain name. | keyword |
user.name | Short name or login of the user. | keyword |
user.name.text | Multi-field of user.name . | match_only_text |
user_agent.original | Unparsed user_agent string. | keyword |
user_agent.original.text | Multi-field of user_agent.original . | match_only_text |
An example event for log
looks as following:
{
"@timestamp": "2018-02-16T08:01:33.000Z",
"agent": {
"ephemeral_id": "88645c33-21f7-47a1-a1e6-b4a53f32ec43",
"id": "94011a8e-8b26-4bce-a627-d54316798b52",
"name": "docker-fleet-agent",
"type": "filebeat",
"version": "8.6.0"
},
"data_stream": {
"dataset": "symantec_endpoint.log",
"namespace": "ep",
"type": "logs"
},
"ecs": {
"version": "8.11.0"
},
"elastic_agent": {
"id": "94011a8e-8b26-4bce-a627-d54316798b52",
"snapshot": true,
"version": "8.6.0"
},
"event": {
"action": "Left alone",
"agent_id_status": "verified",
"count": 1,
"dataset": "symantec_endpoint.log",
"end": "2018-02-16T08:01:33.000Z",
"ingested": "2023-01-13T12:37:44Z",
"kind": "event",
"original": "Potential risk found,Computer name: exampleComputer,Detection type: Heuristic,First Seen: Symantec has known about this file approximately 2 days.,Application name: Propsim,Application type: 127,\"Application version: \"\"3\",0,6,\"0\"\"\",Hash type: SHA-256,Application hash: SHA#1234567890,Company name: Dummy Technologies,File size (bytes): 343040,Sensitivity: 2,Detection score: 3,COH Engine Version: 8.1.1.1,Detection Submissions No,Permitted application reason: MDS,Disposition: Bad,Download site: ,Web domain: ,Downloaded by: c:/programdata/oracle/java/javapath_target_2151967445/Host126,Prevalence: Unknown,Confidence: There is not enough information about this file to recommend it.,URL Tracking Status: Off,Risk Level: High,Detection Source: N/A,Source: Heuristic Scan,Risk name: ,Occurrences: 1,f:\\user\\workspace\\baseline package creator\\release\\Host214,'',Actual action: Left alone,Requested action: Left alone,Secondary action: Left alone,Event time: 2018-02-16 08:01:33,Inserted: 2018-02-16 08:02:52,End: 2018-02-16 08:01:33,Domain: Default,Group: My Company\\SEPM Group Name,Server: SEPMServer,User: exampleUser,Source computer: ,Source IP:"
},
"file": {
"pe": {
"company": "Dummy Technologies",
"file_version": "\"3",
"product": "Propsim"
},
"size": 343040
},
"host": {
"hostname": "exampleComputer",
"name": "exampleComputer"
},
"input": {
"type": "udp"
},
"log": {
"source": {
"address": "172.27.0.4:34299"
}
},
"process": {
"executable": "c:/programdata/oracle/java/javapath_target_2151967445/Host126"
},
"symantec_endpoint": {
"log": {
"actual_action": "Left alone",
"application_hash": "SHA#1234567890",
"application_name": "Propsim",
"application_type": "127",
"application_version": "\"3",
"coh_engine_version": "8.1.1.1",
"company_name": "Dummy Technologies",
"computer_name": "exampleComputer",
"confidence": "There is not enough information about this file to recommend it.",
"detection_score": "3",
"detection_source": "N/A",
"detection_type": "Heuristic",
"disposition": "Bad",
"domain_name": "Default",
"downloaded_by": "c:/programdata/oracle/java/javapath_target_2151967445/Host126",
"end": "2018-02-16 08:01:33",
"event_time": "2018-02-16T08:01:33.000Z",
"file_size_bytes": "343040",
"first_seen": "Symantec has known about this file approximately 2 days.",
"group": "My Company\\SEPM Group Name",
"hash_type": "SHA-256",
"inserted": "2018-02-16T08:02:52.000Z",
"occurrences": "1",
"permitted_application_reason": "MDS",
"prevalence": "Unknown",
"requested_action": "Left alone",
"risk_level": "High",
"secondary_action": "Left alone",
"sensitivity": 2,
"server": "SEPMServer",
"source": "Heuristic Scan",
"url_tracking_status": "Off",
"user_name": "exampleUser"
}
},
"tags": [
"preserve_original_event",
"symantec-endpoint-log",
"forwarded"
],
"user": {
"domain": "Default",
"name": "exampleUser"
}
}
Changelog
Version | Details | Kibana version(s) |
---|---|---|
2.14.0 | Enhancement View pull request | 7.16.0 or higher |
2.13.0 | Enhancement View pull request | 7.16.0 or higher |
2.12.0 | Enhancement View pull request | 7.16.0 or higher |
2.11.0 | Enhancement View pull request | 7.16.0 or higher |
2.10.0 | Enhancement View pull request | 7.16.0 or higher |
2.9.0 | Enhancement View pull request | 7.16.0 or higher |
2.8.0 | Enhancement View pull request | 7.16.0 or higher |
2.7.0 | Enhancement View pull request | 7.16.0 or higher |
2.6.1 | Bug fix View pull request | 7.16.0 or higher |
2.6.0 | Enhancement View pull request | 7.16.0 or higher |
2.5.0 | Enhancement View pull request | 7.16.0 or higher |
2.4.0 | Enhancement View pull request | 7.16.0 or higher |
2.3.1 | Enhancement View pull request | 7.16.0 or higher |
2.3.0 | Enhancement View pull request | 7.16.0 or higher |
2.2.0 | Enhancement View pull request | 7.16.0 or higher |
2.1.1 | Bug fix View pull request | 7.16.0 or higher |
2.1.0 | Enhancement View pull request | 7.16.0 or higher |
2.0.1 | Bug fix View pull request | 7.16.0 or higher |
2.0.0 | Enhancement View pull request | 7.16.0 or higher |
1.2.0 | Enhancement View pull request | 7.16.0 or higher |
1.1.0 | Enhancement View pull request | 7.16.0 or higher |
1.0.1 | Enhancement View pull request | 7.16.0 or higher |
1.0.0 | Enhancement View pull request | 7.16.0 or higher |
0.0.4 | Bug fix View pull request | — |
0.0.3 | Bug fix View pull request | — |
0.0.2 | Enhancement View pull request | — |
0.0.1 | Enhancement View pull request | — |